NAME

SNMP::Info::Layer2::NAP222x - SNMP Interface to Nortel 2220 Series Access Points

AUTHOR

Eric Miller

SYNOPSIS

 # Let SNMP::Info determine the correct subclass for you. 
 my $nap222x = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class = $nap222x->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

Provides abstraction to the configuration information obtainable from a Nortel 2220 series wireless Access Points through SNMP.

For speed or debugging purposes you can call the subclass directly, but not after determining a more specific class using the method above.

 my $nap222x = new SNMP::Info::Layer2::NAP222x(...);

Required MIBs

NORTEL-WLAN-AP-MIB

Inherited MIBs

See Required MIBs in the SNMP::Info::SONMP manpage for its MIB requirements.

See Required MIBs in the SNMP::Info::IEEE802dot11 manpage for its MIB requirements.

See Required MIBs in the SNMP::Info::Layer2 manpage for its MIB requirements.

GLOBALS

These are methods that return scalar value from SNMP

$nap222x->model(): Returns the model extracted from sysDescr.
$nap222x->os(): Returns 'nortel'
$nap222x->os_bin(): Returns the firmware version extracted from ntWlanSwBootRomVer.
$nap222x->mac(): Returns the MAC address of the first Ethernet Interface.
$nap222x->serial(): Returns the MAC address of the first Ethernet Interface.
$nap222x->nt_hw_ver(): Returns the hardware version.; (ntWlanSwHardwareVer)
$nap222x->nt_cc(): Returns the country code of the AP.; (ntWlanSwHardwareVer)
$nap222x->tftp_action(): (ntWlanTransferStart)
$nap222x->tftp_host(): (ntWlanFileServer)
$nap222x->tftp_file(): (ntWlanDestFile)
$nap222x->tftp_type(): (ntWlanFileType)
$nap222x->tftp_result(): (ntWlanFileTransferStatus)
$nap222x->tftp_xtype(): (ntWlanTransferType)
$nap222x->tftp_src_file(): (ntWlanSrcFile)
$nap222x->ftp_user(): (ntWlanUserName)
$nap222x->ftp_pass(): (ntWlanPassword)

Globals imported from SNMP::Info::SONMP

See GLOBALS in the SNMP::Info::SONMP manpage for details.

Global Methods imported from SNMP::Info::IEEE802dot11

See GLOBALS in the SNMP::Info::IEEE802dot11 manpage for details.

Global Methods imported from SNMP::Info::Layer2

See GLOBALS in the SNMP::Info::Layer2 manpage for details.

TABLE METHODS

These are methods that return tables of information in the form of a reference to a hash.

Overrides

$nap222x->interfaces(): Returns reference to map of IIDs to physical ports.
$nap222x->i_duplex(): Returns reference to hash. Maps port operational duplexes to IIDs.; (ntWlanPortSpeedDpxStatus)
$nap222x->i_duplex_admin(): Returns reference to hash. Maps port admin duplexes to IIDs.; (ntWlanPortCapabilities)
$nap222x->i_name(): Returns a human name based upon port description.
$nap222x->bp_index(): Returns a mapping between ifIndex and the Bridge Table. This does not exist in the MIB and bridge port index is not the same as ifIndex so it is created.
$nap222x->i_ssidlist(): Returns reference to hash. SSID's recognized by the radio interface.
$nap222x->i_ssidbcast(): Returns reference to hash. Indicates whether the SSID is broadcast.
$nap222x->i_80211channel(): Returns reference to hash. Current operating frequency channel of the radio interface.
$nap222x->i_vlan(): The default Vlan ID of the radio interfaces.; (ntWlanApVlanDefaultVid)

Table Methods imported from SNMP::Info::SONMP

See TABLE METHODS in the SNMP::Info::SONMP manpage for details.

Table Methods imported from SNMP::Info::IEEE802dot11

See TABLE METHODS in the SNMP::Info::IEEE802dot11 manpage for details.

Table Methods imported from SNMP::Info::Layer2

See TABLE METHODS in the SNMP::Info::Layer2 manpage for details.

	NETDISCO - Network Management Tool - API Documenation	Overview Features User Guide Install Upgrade Register
		Documentation